Taageerada Barnaamijka PC/APP La Socodka Daruuraha Biyo-la'aanta 20A 30A 40A 50A 60A MPPT Xakamaynta Lacagta Qorraxda 12V 24V 48V
| Moodel | SMT24L30 | SMT24L40 | SMT24H50 | SMT24H60 | |
| Waxtarka MPPT | 99.50% | ||||
| Awoodda heeganka | 1W~1.8W | ||||
| Habka Kala-baxa Kulaylka | Dhammaan qolofka aluminiumka ah ee is-kulaylinta | ||||
| Nidaamka baytariga | Nidaamka 12V: 9VDC~15VDC Nidaamka 24V: 18VDC~30VDC | ||||
| Nidaamka baytariga lithium-ion ee la dejin karo | 8VDC~31VDC | ||||
| Astaamaha Gelinta | |||||
| Danabka ugu badan ee gelinta PV (Voc) | 100VDC | 150VDC | |||
| Danab Min.Vmpp | Danabka baytariga + 2V | ||||
| Danabka dallacaadda bilowga ah | Danabka baytariga + 3V | ||||
| Ilaalinta danab-gelinta hoose | Danabka baytariga + 2V | ||||
| 100VDC/95VDC | 150VDC/145VDC | ||||
| Awoodda PV ee la Related | Nidaamka 12V | 420W | 560w | 700w | 840W |
| Nidaamka 24V | 840W | 1120w | 1400w | 1680w | |
| Li-ion | 432W~864W | 576W~1152W | 720W~1440W | 864W~1728W | |
| Astaamaha Kharashaadka | |||||
| Dhaqaajinta baytariga lithium | Ikhtiyaar ah | ||||
| Noocyada baytariga | Shaabadaysan (SEL), Jel(GEL), Daadku ku dhacay (FLD), Isticmaaluhu ku qeexay (USER) AGM, LiFePO4 (4 Xadhig / 7 Xadhig / 8 Xadhig), Baytari lithium ah oo joogto ah (3 Xadhig / 6 Xadhkaha / 7-xarig), baytari lithium ion ah oo gaar ah (Light) | ||||
| Kharashka hadda la qiimeeyay | 30A | 40A | 50A | 60A | |
| Magdhawga heerkulka | -3mV/C/2v | ||||
| Habka lacag bixinta | 3 marxaladood: CC (Heerka joogtada ah) - CV (danabka joogtada ah) - CF (Kharashka sabeynaya) | ||||
| Saxnaanta xasilloonida danab soo saarka | 土0.2V | ||||
| Astaamaha CUSBOONEYSIGA | |||||
| Danabka culayska | Sida danabka batteriga oo kale | ||||
| Culayska hadda la qiimeeyay | 20A | 30A | |||
| Habka xakamaynta rarka | Daar/Dhameyn, qaabka xakamaynta danabka PV, qaabka xakamaynta laba-waqti, PV + Habka xakamaynta waqtiga | ||||
| Ilaalinta danab hooseeya | 10.5V (sida caadiga ah), 11V (la soo celiyay), la dejin karo | ||||
| Habka dejinta | Barnaamijka PC-ga / APP-ga / Xakamaynta | ||||
| Bandhig & Isgaarsiin | |||||
| Muuji | Shaashad buluug ah oo OLED ah | ||||
| Isgaarsiinta | Dual RJ45 deked / RS485 / taageero la socodka software-ka PC / taageerada module WiFi ah La socodka daruuraha APP / taageer kormeer is barbar socda oo dhexe | ||||
| Halbeegyo kale | |||||
| Ilaalinta | Ilaalinta gelinta iyo soo saarista volt-ka xad-dhaafka ah / danab-hooseeya, ilaalinta polarity-ga dib-u-celinta, | ||||
| Heerkulka shaqada ee deegaanka | -20°C~+50°C | ||||
| Heerkulka kaydinta | -40°C~+75℃ | ||||
| IP (Ilaalinta soo gelitaanka) | IP54 | ||||
| Joog sare | 0~3000m | ||||
| Cabbirka ugu badan ee isku xirka | 28mm | ||||
| Jebinta lagu taliyay | =63A | = 63A | = 100A | =100A | |
| Miisaanka Saafiga ah/Miisaanka Guud (kg) | 1.5/1.9 | 2.2/2.6 | |||
| Cabbirka Badeecada / Cabbirka Baakadaha (mm) | 225x152x75mm | 245x192x83mm | |||
1. Maxay qiimahaagu uga sarreeyaa alaab-qeybiyeyaasha kale?
Suuqa Shiinaha, warshado badan ayaa iibiya matoorro jaban oo ay soo saaraan aqoon-is-weydaarsiyo yaryar oo aan shati lahayn. Warshadahan waxay dhimaan kharashaadka iyagoo adeegsanaya qaybo aan tayo lahayn. Tani waxay keentaa khataro amni oo waaweyn.
SOLARWAY waa shirkad xirfad leh oo ku hawlan cilmi-baarista iyo horumarinta, soo saarista, iyo iibinta qalabka korontada dhaliya. Waxaan si firfircoon uga qayb qaadanay suuqa Jarmalka in ka badan 10 sano, annagoo sannad walba u dhoofinayna qiyaastii 50,000 ilaa 100,000 oo qalabka korontada dhaliya ee loogu talagalay Jarmalka iyo suuqyada deriska la ah. Tayada alaabtayadu waxay mudan tahay inaad ku kalsoonaato!
2. Immisa qaybood ayay leeyihiin qalabka korantada ee korontada ku shaqeeya iyadoo loo eegayo qaabka hirarka wax soo saarka?
Nooca 1aad: Qalabkayaga NM iyo NS ee Modified Sine Wave waxay isticmaalaan PWM （Modulation Width Pulse) si ay u soo saaraan mowjad sine ah oo wax laga beddelay. Iyada oo ay ugu wacan tahay isticmaalka wareegyada caqliga leh, ee u heellan iyo transistors-ka saamaynta goobta ee awoodda sare leh, qalabkani si weyn ayuu u yareeyaa luminta korontada wuxuuna hagaajiyaa shaqada bilowga jilicsan, taasoo hubinaysa isku hallayn weyn. In kasta oo nooca qalabkan korontada ku shaqeeya uu dabooli karo baahiyaha qalabka korontada badankood marka tayada korontadu aanay aad u baahnayn, haddana wali wuxuu la kulmaa qiyaastii 20% qallooc iswaafaqsan marka uu shaqeynayo qalab casri ah. Qalabka korontada ku shaqeeya wuxuu sidoo kale sababi karaa faragelin heer sare ah oo ku timaadda qalabka isgaarsiinta raadiyaha. Si kastaba ha ahaatee, nooca qalabka korontada ku shaqeeya waa mid hufan, wuxuu soo saaraa buuq yar, waa mid qiimo dhexdhexaad ah leh, sidaas darteedna waa badeecad caan ah oo suuqa taal.
Nooca 2aad: Inverters-kayaga taxanaha NP, FS, iyo NK ee Pure Sine Wave waxay qaataan naqshad wareeg ah oo go'doonsan, iyagoo bixiya hufnaan sare iyo qaabab mowjado oo deggan. Iyada oo la adeegsanayo tignoolajiyada soo noqnoqoshada sare leh, inverters-yadan awoodda leh waa kuwo is haysta oo ku habboon culaysyo badan. Waxaa lagu xidhi karaa aaladaha korontada ee caadiga ah iyo culaysyada soo-jiidashada (sida qaboojiyeyaasha iyo layliyada korontada) iyada oo aan la keenin wax faragelin ah (tusaale ahaan, buuq ama buuq TV). Soo saarista inverter-ka awoodda sine ee saafiga ah wuxuu la mid yahay awoodda shabakadda ee aan isticmaalno maalin kasta - ama xitaa ka sii fiican - maadaama aysan soo saarin wasakhowga elektromagnetic-ka ee la xiriira awoodda shabakadda ku xiran.
3. Waa maxay qalabka culayska iska caabiya?
Qalabka sida taleefannada gacanta, kombiyuutarrada, TV-yada LCD-ga, nalalka iftiinka, taageerayaasha korontada, warbaahinta fiidiyowga, daabacayaasha yaryar, mashiinnada korontada ku shaqeeya ee mahjong, iyo makiinadaha karinta bariiska ayaa loo arkaa inay yihiin kuwo iska caabiya. Makiinadahayaga hirarka sine ee wax laga beddelay ayaa si guul leh u awoodsiin kara aaladahaan.
4. Waa maxay qalabka culayska soo-jiidashada?
Qalabka culayska soo-saarista waa aaladaha ku tiirsan kicinta elektromagnetic-ka, sida matoorada, kombaresarada, gudbinta, nalalka iftiinka leh, shooladaha korontada ku shaqeeya, qaboojiyeyaasha, qaboojiyaha hawada, nalalka tamarta badbaadiya, iyo bambooyin. Qalabkani wuxuu caadi ahaan u baahan yahay 3 ilaa 7 jeer awooddooda la qiimeeyay inta lagu jiro bilowga. Natiijo ahaan, kaliya koronto-dhaliye saafi ah oo sine hir ah ayaa ku habboon in lagu shido.
5. Sidee loo doortaa beddel ku habboon?
Haddii culayskaagu ka kooban yahay qalab iska caabin ah, sida nalalka iftiinka, waxaad dooran kartaa inverter-ka hirarka sine-ka ee wax laga beddelay. Si kastaba ha ahaatee, culaysyada inductive-ka iyo kuwa capacitive-ka ah, waxaan kugula talineynaa inaad isticmaasho inverter-ka hirarka sine-ka ee saafiga ah. Tusaalooyinka culaysyadaas waxaa ka mid ah marawaxadaha, qalabka saxda ah, qaboojiyeyaasha hawada, qaboojiyaha, mashiinnada qaxwada, iyo kombiyuutarrada. In kasta oo inverter-ka hirarka sine-ka ee wax laga beddelay uu bilaabi karo culaysyo inductive ah, haddana wuu gaabin karaa cimrigiisa sababtoo ah culaysyada inductive-ka iyo kuwa capacitive-ka ah waxay u baahan yihiin awood tayo sare leh si loo helo waxqabad wanaagsan.
6. Sideen u dooran karaa cabbirka inverter-ka?
Noocyada kala duwan ee culaysku waxay u baahan yihiin xaddi kala duwan oo koronto ah. Si aad u go'aamiso cabbirka qalabka korontada ku shaqeeya, waa inaad hubisaa qiimeynta awoodda culayskaaga.
- Culaysyada iska caabbinta: Dooro inverter leh qiimeyn awood la mid ah tan culayska.
- Culaysyada awoodda leh: Dooro inverter leh 2 ilaa 5 jeer oo ah heerka awoodda ee culayska.
- Culaysyada Inductive-ka: Dooro inverter leh 4 ilaa 7 jeer oo ah heerka awoodda ee culayska.
7. Sidee baytariga iyo qalabka korontada ku shaqeeya loogu xidhi karaa?
Guud ahaan waxaa lagu talinayaa in fiilooyinka ku xira terminaalka baytariga iyo inverter-ka ay noqdaan kuwo gaaban intii suurtogal ah. Fiilooyinka caadiga ah, dhererkoodu waa inaanu ka badnayn 0.5 mitir, polarity-guna waa inuu la mid noqdaa baytariga iyo inverter-ka.
Haddii aad u baahan tahay inaad kordhiso masaafada u dhaxaysa baytariga iyo inverter-ka, fadlan nala soo xiriir si aad u hesho caawimo. Waxaan xisaabin karnaa cabbirka fiilada iyo dhererka ku habboon.
Maskaxda ku hay in isku xirka fiilooyinka dheer ay sababi karaan luminta danabka, taasoo la micno ah in danabka inverter-ku uu si weyn uga hooseeyo danabka terminal-ka batteriga, taasoo horseedaysa digniin hoose oo ku saabsan inverter-ka.
8.Sidee u xisaabisaa culayska iyo saacadaha shaqada ee loo baahan yahay si loo habeeyo cabbirka batteriga?
Caadiyan waxaan u isticmaalnaa qaacidada soo socota xisaabinta, inkastoo laga yaabo inaysan 100% sax ahayn sababo la xiriira arrimo sida xaaladda batteriga. Baytariyada duugga ah ayaa laga yaabaa inay khasaare keenaan, markaa tan waa in loo tixgeliyaa qiime tixraac ah:
Saacadaha Shaqada (H) = (Awoodda baytariga (AH)*Danabka baytariga (V0.8)/ Awoodda rarka (W)
